Screen tempered glass is not damaged by severe vibration or shock. Even if it is destroyed, it is not easy to damage the surface of the tempered glass. Print a layer of ceramic glaze. After the high temperature heat treatment, the glaze film will be firml
Hollow laminated glass is a kind of insulating glass, which is a combination of insulating glass and laminated glass.It is composed of three or more pieces of glass and is widely used in buildings such as curtain walls. The glass and the glass are kept at
The family container house was build in open area with nice sightseeing, there are two bedrooms, one living room and two bathrooms, and each bedroom has two windows, in the bedroom, there is one night table near the bed, and there is one chest and one des
As the application of the scaffold is becoming more and more common, due to a little different from the traditional scaffold, so for people who have not been in contact with, always ask this question, today to make arrangements, hope to be able to help th
Magnesium board fire rating is A grade Fire rating Mgo board, It is widely used as Wall partition, Interior & Exterior wall, Ceiling, Flooring on various buildings, such as shopping malls, residential building, office buildings, hotels and etc.
This product consists of two rooms that can be used as single apartments or as dorms. The kitchen and living room are together, which greatly saves cost and space. The bedroom can be designed with a double bed and a table. The toilet is designed between t
Today we are facing the fierce competition in the domestic and international markets, the development direction of Wenzhou Hanlock Hardware Co. Ltd is based on the tenet of “Quality First, Service First”.
Base cabinets are the cabinets mounted on the floor that usually support the countertops. Kitchen islands are also a form of base cabinet and can be a combination of several base cabinets joined together or a custom-made base.
Rotational Moulding, also called rotomolding, is a thermoplastic process for producing hollow parts by placing powdered resin into a hollow mould and then rotating that mould bi-axially in an oven until the resin melts and coats the inside of the mould.